🔧 GPU Cooling Fan for Lenovo ThinkPad P1 Gen 8 🔧

🖥️ ThinkPad P1 Gen 8 | GPU Fan | B7108BFHSF2400TN

Genuine graphics card (GPU) cooling fan designed for the Lenovo ThinkPad P1 Gen 8 (types 21Q8, 21Q9). Brand new part marked on the label with model code B7108BFHSF2400TN, manufactured by ELEPEAK (PEAK), the factory fan supplier for Lenovo thermal modules. The label code lets you easily confirm it matches the fan installed in your laptop.

⚙️ PRODUCT OVERVIEW

The fan drives airflow through the heatsink fins on the graphics side and removes heat generated by the GPU and VRAM. The ThinkPad P1 Gen 8 thermal module uses two fans, and this unit is the graphics-side fan. In integrated graphics versions, the same fan sits in the same position of the thermal module. The module versions differ only in the heatsink, not in the fans. Power rating DC 12V 0.5A, cable terminated with a white connector. Lenovo does not assign a separate FRU number to the fan alone, so the label model code is the primary identifier. The FRU numbers of the thermal modules that use this fan are listed for reference.

📋 TECHNICAL SPECIFICATIONS

Part name: GPU cooling fan
Brand: Lenovo ThinkPad
Compatible model: ThinkPad P1 Gen 8 (types 21Q8, 21Q9)
Label marking: B7108BFHSF2400TN
Fan manufacturer: ELEPEAK (PEAK)
Power: DC 12V, 0.5A
Label markings: PEAK, MODEL B7108BFHSF2400TN, DC 12V 0.5A, PEKLCE2S, 56S00645, WWW.ELEPEAK.COM, MADE IN CHINA, EP
Condition: New
Warranty: 12 months
Thermal module FRUs (for reference): 5H41R89133, 5H41R89134, 5H41R89135 (discrete graphics versions), 5H41R89130, 5H41R89131, 5H41R89132 (integrated graphics versions)

🌟 KEY BENEFITS

🔹 Genuine fan from the Lenovo module - the same ELEPEAK model fitted at the factory in the ThinkPad P1 Gen 8 thermal module, so it fits without any modification
🔹 Graphics-side cooling - restores full airflow over the GPU, so the card holds its clocks during rendering, CAD or gaming instead of slowing down from heat
🔹 Easy identification by label code - just compare B7108BFHSF2400TN with the label on the fan in your laptop, no need to look up the whole module FRU
🔹 Replace the fan only - when the fan gets noisy or stops spinning, there is no need to buy the complete module with heatsink
⚠️ GPU-side fan - the ThinkPad P1 Gen 8 uses two different fans (mirrored housings). Please compare the label code with the fan in your laptop before ordering

🔢 PART NUMBERS

Label marking: B7108BFHSF2400TN
Thermal module FRUs (for reference): 5H41R89133, 5H41R89134, 5H41R89135 (discrete graphics versions), 5H41R89130, 5H41R89131, 5H41R89132 (integrated graphics versions)
Laptop model: Lenovo ThinkPad P1 Gen 8 (21Q8, 21Q9)

❓ WHEN SHOULD YOU REPLACE THE GPU FAN?

• Loud whining or rattling from the fan that gets worse under graphics load
• High GPU temperature: the laptop slows down, games and renders stutter after a few minutes
• The fan does not spin and a Fan error message appears at startup
• Damaged impeller or bearing: grinding noise or uneven fan speed
• The laptop shuts down under heavy load due to overheating

🔧 INSTALLATION

1. Turn off the laptop and disconnect the power adapter and all external devices
2. Remove the screws securing the base cover and carefully take it off
3. Disconnect the battery from the system board
4. Unplug the fan connector from the system board
5. Detach the old fan from the thermal module: remove the mounting screws and peel off the sealing tapes
6. Fit the new fan in the same position, screw it in place and restore the tape seal
7. Route the cable the same way as the original and plug it into the system board
8. Reconnect the battery, refit the base cover, power on and check fan operation under load
⚠️ If the replacement requires removing the whole thermal module, renew the thermal interface material according to Lenovo guidelines before reassembly. The ThinkPad P1 Gen 8 uses liquid metal cooling.
Installation by a service technician or an experienced person is recommended.

🎯 APPLICATION

This fan is intended for Lenovo ThinkPad P1 Gen 8 mobile workstations used for CAD, rendering, video editing and GPU computing. Replacing it brings back quiet operation and stable GPU temperatures without the cost of a complete thermal module. The exact appearance and condition of the item are shown in the photos.

✅ COMPATIBILITY GUARANTEE

This fan has been carefully checked and matched to the Lenovo ThinkPad P1 Gen 8. We guarantee full compatibility for label code B7108BFHSF2400TN and 100% functionality. In case of any compatibility issues, we offer a hassle-free return within 14 days.

📞 NEED HELP? CONTACT OUR EXPERTS!

Do you have questions about the compatibility of this fan with your ThinkPad P1 Gen 8? Our specialists will be happy to assist you. Contact us!
📱 Phone: +48-601-415357
📧 Email: sklep@abcdeal.pl

🦁 ABCDEAL - Your Trusted Lenovo Parts Specialist

We have been specialising in delivering genuine Lenovo laptop parts for years. Our experience allows us to offer top quality products that meet the expectations of even the most demanding customers. Trust the experts and restore your ThinkPad P1 Gen 8 to full working order.

🎯 Choose professionals - invest in quality!

By choosing a genuine GPU fan for the Lenovo ThinkPad P1 Gen 8 from our store, you invest in reliability and stable graphics performance under full load. Benefit from the expertise of ABCDEAL specialists and bring your laptop back to full performance.

📦 Want to know more about shipping and return conditions? Click here
❓ Have additional questions? Check our FAQ