🔧 Cooling Assembly (Fans with Heatsink) for Lenovo ThinkPad P15 Gen 1 N19E 🔧

🖥️ ThinkPad P15 Gen 1 | CPU + GPU thermal module | 2 Delta fans | N19E version | FRU 5H40X89381

Genuine, complete CPU and GPU cooling assembly with two fans, dedicated to the Lenovo ThinkPad P15 Gen 1 (Type 20ST, 20SU). Part sourced from a working device and tested - we guarantee 100% functionality. FRU number 5H40X89381 guarantees full compatibility with the ThinkPad P15 Gen 1 in the N19E version.

⚙️ PRODUCT CHARACTERISTICS

In the Lenovo catalogue the part is called "Thermal Module FAN+Heatsink Raptor-1 N19E". It is one assembly: copper heat pipes, a heatsink plate over the CPU and graphics card with thermal pads for the power and memory sections, two finned heatsinks and two fans, Delta Electronics ND65C27 (5 V, 0.45 A) and ND75C49 (5 V, 0.5 A). The fan housing is stamped P15, and the label shows FRU PN 5H40X89381. The N19E designation refers to the version for a specific graphics card family, so compare the FRU with your unit before buying. The N19P version is a different part (5H40X89382) with a different shape.

📋 TECHNICAL DATA

Part name: CPU and GPU cooling assembly (thermal module, fans with heatsink)
Brand: Lenovo ThinkPad
Compatible model: ThinkPad P15 Gen 1 (Type 20ST, 20SU), N19E version
Fans: 2 pcs, Delta Electronics ND65C27 (5 V, 0.45 A) and ND75C49 (5 V, 0.5 A)
Design: copper heat pipes, CPU and GPU heatsink plate with thermal pads, two finned heatsinks
Connectors: two fan cables with plugs to the motherboard
Condition: Used (tested), 100% functional
Warranty: 6 months
FRU: 5H40X89381
Replacement numbers: 5H40X89383
Label markings: FRU PN 5H40X89381, SH40R19699, AT1K9001DT0, DTA3 0A 0B8
Lenovo description: Thermal Module FAN+Heatsink Raptor-1 N19E

🌟 KEY ADVANTAGES

🔹 Genuine Lenovo part - holes, thermal pads and heat pipes fit the P15 Gen 1 board perfectly
🔹 Two Delta fans - CPU and graphics card are cooled separately, so the laptop keeps its performance during rendering and calculations, without throttling
🔹 Tested and 100% functional - the fans spin evenly and quietly, with no bearing rattle
🔹 Complete assembly - you replace the whole unit at once, without taking fans and heatsinks apart
🔹 Full compatibility - matched to the ThinkPad P15 Gen 1 under FRU number 5H40X89381

🔢 CATALOG NUMBERS

FRU: 5H40X89381
Replacement numbers: 5H40X89383 (version with Sunon fans)
Label markings: FRU PN 5H40X89381, SH40R19699, AT1K9001DT0, DTA3 0A 0B8
Fans: Delta ND65C27, ND75C49
Laptop model: Lenovo ThinkPad P15 Gen 1 (Type 20ST, 20SU)

❓ WHEN SHOULD YOU REPLACE THE COOLING ASSEMBLY?

• Problem with an overheating laptop that slows down or shuts off under heavier load
• Problem with a loud, rattling or whining fan
• Problem with a "Fan error" message at startup
• Problem with a faulty fan that does not spin at all
• Problem with a clogged or bent heatsink that lets little air out of the vent

🔧 INSTALLATION PROCESS

Sequence according to the Lenovo Hardware Maintenance Manual for the ThinkPad P15 Gen 1.
1. Turn off the laptop, disconnect the AC adapter and all external devices, and disable the built-in battery in BIOS (Disable built-in battery)
2. Remove in order: the bottom door, keyboard, keyboard bezel and bottom cover
3. Disconnect both fan connectors from the motherboard
4. Loosen the 8 heatsink screws in the order of the numbers stamped on the heatsink plate and remove the old cooling assembly
5. Remove the old paste from the CPU and GPU and check the thermal pads
6. Apply 0.2 g of thermal grease to the CPU and the GPU (the amount recommended by Lenovo)
7. Fit the cooling assembly and tighten the screws in numerical order, without pressing the fan impellers or covers
8. Connect the fan connectors, reassemble the laptop in reverse order and connect the AC adapter
9. Start the laptop and check temperatures and the operation of both fans under load
Replacement is recommended by a technical service or a person experienced in laptop repairs.

🎯 PURPOSE

This cooling assembly is intended for users and service centres repairing a ThinkPad P15 Gen 1 with overheating, loud fans or a fan error. It suits a workstation used for 3D graphics, CAD and calculations, where stable operation under load matters. The exact appearance and condition of the offered item are shown in the photos in the listing.

✅ COMPATIBILITY GUARANTEE

The offered cooling assembly has been carefully tested and matched to the Lenovo ThinkPad P15 Gen 1. We guarantee full compatibility with regard to FRU number 5H40X89381 and 100% functionality of the part, covered by a 6-month warranty. In case of any compatibility issues, we provide a hassle-free return within 14 days.

📞 NEED HELP? CONTACT OUR EXPERTS!

Do you have questions about the compatibility of this cooling assembly with your ThinkPad P15? Our specialists will be happy to assist you. Contact us!
📱 Phone: +48-601-415357
📧 Email: sklep@abcdeal.pl

🦁 ABCDEAL - Your Trusted Lenovo Parts Specialist

We have been specialising in delivering genuine Lenovo laptop parts for years. Our experience allows us to offer top-quality products that meet the expectations of even the most demanding customers. Trust the experts and restore full functionality to your ThinkPad P15.

🎯 Choose professionals - invest in high quality!

By choosing a genuine cooling assembly for the Lenovo ThinkPad P15 Gen 1 from our offer, you invest in reliability and stable workstation performance under load. Take advantage of ABCDEAL's expertise and restore full functionality to your laptop.

Useful information:
📦 Want to know more about shipping and return conditions? Click here
❓ Have additional questions? Check our FAQ
🔗 All parts for this model: Lenovo ThinkPad P15 spare parts
📘 Guide: Laptop overheating and loud fans